Theoretical research of impact vibration of multi-section serial pipeline inspection gauge in large drop pipeline

Abstract

When operating in large drop pipelines, pipeline inspection gauge may experience severe impact vibration at elbows, potentially leading to its failure. This paper focuses on serial pipeline inspection gauges with multiple sections in large drop pipelines, analyzes the force acting on the pipeline inspection gauge during the descent phase, and establishes a multi-body dynamics model of the gauge under pipe-soil coupling conditions. In addition, a correction formula is developed for the pressure changes in the medium at the front and rear of the pipeline inspection gauge. To solve the model, MSC/ADAMS and MATLAB/Simulink are used for the bi-directional fluid–structure-interaction joint simulation. Moreover, the results are compared with the pipeline inspection gauge motion model established by OLGA. The study investigates the dynamic responses, vibration superposition and laws of dynamic evolution at the upper and lower elbows of the large drop pipeline. The results show that the speed of the gauge increases suddenly during the descent in large drop sections and then stabilizes, with different effects of the fluid medium pressure difference at various stages. The vibration responses along the axial, horizontal radial, and vertical directions at the elbows vary, with the second section experiencing stronger vibrations due to superposition effects. Compared to fixed boundaries, the acceleration extremes of the gauge are lower under the constraints of pipe-soil model, indicating significant soil buffering and vibration damping effects.