Theoretical and experimental study of a highly sensitive SPR biosensor based on Au grating and Au film coupling structure.

Abstract

A high-sensitivity surface plasmon resonance (SPR) sensor based on the coupling of Au grating and Au film is investigated through simulations and experiments. The SPR sensor is designed by using a hybrid method composed of genetic algorithm (GA) and rigorous coupled wave analysis (RCWA). The numerical results indicate the sensor has an angular sensitivity of 397.3°/RIU (refractive index unit), which is approximately 2.81 times higher than the conventional Au-based sensor and it is verified by experiments. Theoretical analysis, by finite-difference time-domain (FDTD) method, demonstrates the co-coupling between surface plasmon polaritons (SPPs) propagating on the surface of Au film and localized surface plasmons (LSPs) in the Au grating nanostructure, improving the sensitivity of the SPR sensor. According to the optimized structural parameters, the proposed sensor is fabricated using e-beam lithography and magnetron sputtering. In addition, the proposed sensor is very sensitive to the detection of small molecules. The limit of detection (LOD) for okadaic acid (OA) is 0.72 ng/mL based on an indirect competitive inhibition method, which is approximately 38 times lower than the conventional Au sensor. Such a high-sensitivity SPR biosensor has potential in the applications of immunoassays and clinical diagnosis.