The wake flow downstream of a propeller-rudder system

Abstract

Listen

Translate article

We report wall-resolved, large-eddy simulations for the case of a propeller operating upstream of a hydrofoil, mimicking a rudder. Our primary objective is the identification of wake features that are unique to this coupled system, when compared to open-water cases, which are usually the focus of experiments and computations in the literature. We were able to achieve unprecedented levels of numerical resolution, which capture the dynamics of all energetic eddies in the flow by using a scalable, conservative, structured solver in cylindrical coordinates. The boundary conditions on the rotating propeller and hydrofoil were enforced via an immersed boundary formulation. The largest values of turbulent stresses in the wake of the hydrofoil are achieved outwards from the radial coordinate of the tip of the propeller blades. This is due to spanwise gradients across the hydrofoil (in the direction parallel to the span of the hydrofoil), producing a displacement of the pressure side legs of the tip vortices towards outer coordinates, where they experience shear with the wake of the hydrofoil. The evolution of turbulence is non-monotonic across the streamwise direction. This is a consequence of the growing shear resulting from the complex interactions involving the shear layers from the trailing edge, the tip vortices and the two branches of the hub vortex coming from the two sides of the hydrofoil. Such a shear is reinforced by the spanwise velocities developed by the two branches of the propeller wake across the hydrofoil. Compared to an isolated propeller, these phenomena enhance turbulence production. The present results highlight that a downstream hydrofoil, typical of surface ships, is able to significantly intensify the wake signature of a propeller.