Abstract
A 3D vertically stacked silicon nanowire (SiNW) and Fin field effect transistor (FET) featuring a high density array (7 or 8×20 SiNWs,>4 Fins vertically stacked) of fully depleted, ultra-thin (SiNWs diameters ∼15–30nm, Fin width/height fw ∼30nm/fh ∼150nm), long (>2μm) and suspended channels has been successfully fabricated for the first time by a top-down, complementary metal oxide semiconductor (CMOS) compatible process on silicon on insulator (SOI) substrates for biosensing applications. SiNW and FinFETs continue to draw interest as biological sensors for their outstanding sensitivity due to their large surface to volume ratios (S/V), high selectivity towards a myriad of analytes through surface functionalization and the possibility for label free, direct monitoring of biological activities. In this paper we describe different strategies and limitations for the successful development and fabrication of a 3D Si nanostructure FET using conventional clean-room fabrication techniques and their integration into heterogeneous systems. The vertical stacking allows for higher utilization of the Si substrate, high output currents (1.3mA/μm, normalized to a NW diameter of 30nm at VSG=3V, and Vd=50mV, for a standard structure with 7×10NWs stacked) and high chances for biomolecule interaction as the number of conduction channels increases. Also, as the NWs/Fins are suspended, their entire surface area is exposed to the sensing analyte. The configuration of the 3D sensor furthermore offers excellent electrostatic control of the channels by the possibility of applying symmetric or asymmetric gate potentials to tune the sensitivity and optimize the power consumption. Our fabrication scheme is competitive in terms of scaling and NW density in comparison to bottom-up and other top-down approaches with the advantage of using a CMOS-compatible, high yield (>90%), reproducible and robust processes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.