Abstract
AbstractThis investigation explores the potential of improving the performance of poly(ethylene terephthalate) fibers by incorporating novel thermotropic liquid crystalline copolymers. Fibers were obtained by melt extrusion and the effect of processing conditions, i.e., spinning temperature, stretch ratio, and post treatment evaluated. The fibers were tested for mechanical performance, dimensional instability (shrinkage), and the development of shrinkage stresses. A segmented block copolymer consisting of rigid‐rod, diad, and flexible coil segments was found to improve the performance of poly(ethylene terephthalate) (PET) fibers. At a concentration of 20 wt %, the alternating block copolymer increased the tensile modulus of the fibers by 40% and decreased free shrinkage by 20% compared to neat PET. © 1994 John Wiley & Sons, Inc.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
