Abstract
Lead-free relaxor ferroelectric ceramics 0.95Na 0.425 Bi 0.425 Ca 0.15 TiO 3 -0.05 Mg with different polyvinyl alcohol contents (NBCT-Mg- x PVA) were prepared by viscous polymer processing to generate high density and induce high breakdown strength (BDS) and high recoverable energy storage density ( W rec ). The rheology properties of the ceramic pastes had been systematically studied. The content of PVA has exhibited a great influence on the microstructure and property of ceramics. Through the analysis of ceramics with different PVA contents, it is found that the less PVA content, the less pores and greater BDS on the premise of film formation. The related other electrical performances of the resulting ceramics have also been performed. Especially for the NBCT-Mg-0.4PVA ceramics, the BDS of it reached as high as 320 kV/cm, and the W rec was 4.51 J/cm 3 , which also exhibited excellent temperature stability (30–135 °C) and frequency stability (0.2–50 Hz), as well as good stability during charged-discharged process and achieve high power density.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.