The series of measures for improvement of safety in oil and gas facilities producing, processing and transporting materials containing hydrogen sulfide Part 1. Corrosion-mechanical attack of hydrogen sulfide-containing media on steel equipment. The choice of construction steels and noncorrosive alloys for the oil and gas equipment

Abstract

The necessity of the complex approach is defined for increase of reliability of the oil and gas equipment operated under pressure of hydrogen sulfide-containing medium, including: - control at the stages of design, manufacturing, commissioning, operation, repair and reconstruction; - organization of corrosion service; - rational choice of materials for equipment manufacturing and its repair; - use of different methods to protect equipment against corrosion: - diagnostics of equipment and evaluation of corrosion protection efficiency; - conducting corrosion tests of materials and corrosion control. The trend of increasing corrosive activity of the products of a number of hydrogen sulfide-bearing oil and gas fields is described. This is associated with their watering and contamination by sulfate-reducing bacteria. All types of corrosion-mechanical damage of steels in accordance with GOST R 53679-2009 (ISO 15156-1:2001) are considered. Comments are given on each of these types of damage and the types of steels that are prone to these defects are shown. The recommendations of GOST R 53679-2009 (ISO 15156-1:2001) are given for the selection of steel equipment operated under pressure of hydrogen sulfide-containing media depending on the type of their corrosionmechanical failure, with comments. Requirements for the use of steels modified with rare-earth metals (REM) and alkaline-earth elements (ALE) intended for operation in hydrogen sulfide-containing media are given.