Abstract
The high melting point and the covalent bond between Ti and N made the titanium nitride matrix composites difficult to sinter using conventional sintering methods. TiN0.3 and onion-like carbon (OLC) were used as starting materials for the preparation of TiN0.3/onion-like carbon composites under high pressure and high temperature (HTHP) of 5.0 GPa and 1100–1400 °C for 10 min. The phase formation, microstructure, and mechanical properties of TiN0.3 composites with different contents of onion-like carbon were systematically investigated by XRD, SEM, and TEM. The experimental results showed that TiC0.3N0.7 was formed by diffusion of TiN0.3 with onion-like carbon due to the dual effect of high concentration of N vacancies and high pressure, and the onion-like carbon was gradually graphitized with increasing temperature. The composites of TiN0.3/5 vol% onion-like carbon sintered at 1200 °C possessed the optimum properties, with hardness of 15.2 GPa and fracture toughness of 3.9 MPa·m1/2. Compared with TiN composites prepared by conventional methods, the non-stoichiometric compound reduced the sintering temperature of the TiN composites.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.