The Role of Arginine as a Complexing Agent in Copper CMP

Abstract

AbstractChemical mechanical polishing (CMP) of copper was investigated in hydrogen peroxide and arginine slurries. Arginine was found to be a complexing agent for the copper in peroxide based slurries, in the alkaline region. The copper polish rate was measured in a Struers LaboPol-5 and LaboForce-3 CMP polishing tool. Static etch rate experiments of copper discs (25.4 mm Dia × 10 mm) were carried in 200 ml beakers with different combinations of hydrogen peroxide and arginine concentrations. Peroxide concentration was varied from 0 to 10 vol%, while the arginine concentration was varied from 0 to 1 wt% for both static etch and polish rate experiments. Fumed silica used as the abrasive medium for polishing.The electrochemical processes involved in oxidative dissolution of copper were investigated by the Tafel corrosion plots and OCP measurements, using the Princeton Applied Research potentiostat. Three electrode corrosion flat cell was used for the electrochemical measurements. Corrosion current density and open circuit potentials (OCP) were used to elucidate the oxidative behavior of peroxide and the complexing role of arginine. Surface characteristics of the polished copper surface were analyzed with the Digital Instruments NanoScope AFM. Polishing with these chemicals resulted in smooth finish.These results indicated that the arginine curtails the formation of oxidative layer on the copper surface and the removal rate was increased by forming complex with the copper.