Abstract

Photoelectron spectroscopy offers detailed information about the electronic structure and chemical composition of surfaces, owing to the short distance that the photoelectrons can escape from a dense medium. Unfortunately, photoelectron based spectroscopies are not directly compatible with the liquids required to investigate electrochemical processes, especially in the soft X-ray regime. To overcome this issue, different approaches based on photoelectron spectroscopy have been developed in our group over the last few years. The performance and the degree of information provided by these approaches are compared with those of the well established bulk sensitive spectroscopic approach of total fluorescence yield detection, where the surface information gained from this approach is enhanced using samples with large surface to bulk ratios. The operation of these approaches is exemplified and compared using the oxygen evolution reaction on IrOx catalysts. We found that all the approaches, if properly applied, provide similar information about surface oxygen speciation. However, using resonant photoemission spectroscopy, we were able to prove that speciation is more involved and complex than previously thought during the oxygen evolution reaction on IrOx based electrocatalysts. We found that the electrified solid-liquid interface is composed of different oxygen species, where the terminal oxygen atoms on iridium are the active species, yielding the formation of peroxo species and, finally, dioxygen as the reaction product. Thus, the oxygen-oxygen bond formation is dominated by peroxo species formation along the reaction pathway. Furthermore, the methodologies discussed here open up opportunities to investigate electrified solid-liquid interfaces in a multitude of electrochemical processes with unprecedented speciation capabilities, which are not accessible by one-dimensional X-ray spectroscopies.

Highlights

  • In this work different approaches were used to investigate electrochemical interfaces with photoelectron spectroscopy

  • Detailed insights into the electronic structure of an electrified interface requires the collection of relevant X-ray spectroscopy data (XPS, NEXAFS and resonant photoemission spectroscopy (ResPES)) under operando conditions

  • In order to overcome this limitation and investigate the electronic structure of the electrified solid-liquid interfaces under reaction conditions, different approaches compatible with photoelectron spectroscopy were developed in our group in the last years

Read more

Summary

Introduction

In this work different approaches were used to investigate electrochemical interfaces with photoelectron spectroscopy. Bulk sensitive methods like XAS in TFY mode, can provide valuable information about the electronic structure of an electrified interface under electrocatalytic reactions conditions using materials with high surface to bulk ratios like the mesoporous film used in this study In such systems, the challenge is to compare the information acquire with the bulk sensitive XASTFY method to the surface sensitive spectroscopies techniques based on photoelectron spectroscopy, which can directly reveal information related to the electrified solid-liquid interface directly and . Metallic iridium present during the OER is ascribed to the side of the electrode facing the vacuum chamber, i.e. no contact with Nafion neither with liquid electrolyte Another approach for the investigation of solid liquid interfaces with soft X-rays is based on free standing 2D (graphene) membranes [49,50,51]. 0.1 M H2SO4/Ir thin film/SiNx/HV 0.1 M H2SO4/Mesoporous Ir /SiNx/HV 0.1 M H2SO4/Nafion/Ir thin film/HV 0.1 M H2SO4/Ir NPs/Graphene/Holey SiNx/HV 0.1 M H2SO4/Nafion/Ir NPs/Graphene/HV 0.1 M H2SO4/Nafion/Mesoporous Ir/Graphene/HV

Spectroscopy Methods Photons Photons
Findings
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call