The Removal of Salmonellas in Conventional Sewage Treatment Processes

Abstract

The numbers of salmonellas in raw sewage entering a treatment plant varied hourly and diurnally; their peak concentration preceded the peak influent waste water flow into the plant by about 2 hours. Salmonellas were detected in all raw influent samples collected from 2 sewage works and the mean population level at the daily peak period was 3000 organisms/1. On average. 70–80% of the salmonellas were removed during primary sedimentation when upwards of 74–84% of solids were removed. Biological treatment and secondary sedimentation removed a further 70–100% of the pathogen. Compared with the activated sludge process the trickling filters were less efficient in removing salmonellas and they were adversely affected by increased loading following rainfall. Considering the whole treatment process, the Guildford works with its activated sludge treatment removed an average of 99–83% salmonellas while the Woking works with its trickling filter plant removed an average of 93–04% of the organisms. The large variance in the numbers of salmonellas in the final effluent from the trickling filters suggest that greater emphasis should be placed on the actual quality of the effluent rather than on percentage removal efficiencies.