Abstract
In long-life applications, the corrosion properties of cemented carbides can have a large influence on overall performance. Cemented carbides with improved corrosion resistance have been developed and are now commercially available. The understanding of the corrosion behaviour has been mostly empirical and satisfying explanations of the relationship between the electromechanical behaviour and in-service corrosion have been lacking. In this paper, the electromechanical behaviour of WC-Co is modelled using the behaviour of pure WC and Co(W,C) alloys, according to a linear rule of mixtures. By comparing WC-Co with WC-Ni(Cr,Mo) in both normal sulphuric acid and a synthetic mine water, it is shown that the behaviour of the two grades is inherently different. WC-Co exhibits a ‘pseudo-passivity’ during electro-mechanical tests but corrodes actively in industrial applications. In contrast, WC-Ni( Cr,Mo) passivates and the rate of corrosion can be several orders of magnitude lower than that of WC-Co.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Refractory Metals and Hard Materials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.