Abstract
Coatings of Al 2O 3 were deposited on Incoloy 800H and AISI 304 by means of metal organic chemical vapour deposition. Diffusion limitation was the rate-determining step above 420 °C. Below this temperature, the activation energy of the reaction appeared to be 30 kJ mol −1. Coating with Al 2O 3 increases the sulphidation resistance by at least 4–10 times. The sulphidation resistance is influenced by the growth rate of the coating and by the thermomechanical properties of the coating - substrate combination. The sulphidation resistance also depends on the growth rate of the coating. The weight gain of coated specimens is about 10–14 times less than that of uncoated specimens. Treatment of the coated samples in air at 850 °C results in a still higher sulphidation resistance. This is due to the chromium oxide grown into the cracks in the coating during the treatment. These cracks are the result of mechanical stresses at irregularities.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
