The Process of Sol-Gel Method Prepared Bi-2212 Superconductors Tapes

Abstract

In this dissertation, Bi-2212 superconducting tapes was prepared by sol-gel method, in addition we mainly studied heat treatment conditions and sintering material drying conditions of the NiO/Ni substrate, and gived a optimization to the process. The heat treatment process of the NiO/Ni substrate had been researched.Based on previous experience, we explored the temperature of heat treatment and improved the process.Afterheattreatment,the samples was analyzed by metallographic microscope and X-ray diffraction,and we analysed these data. It’s concluded that the dense uniform oxide film can be sintered in 800°C with a 3 hours’ heat treatment.We further explored the conditions of the Bi-2212 superconducting materials.During the preparation. We mainly studied the drying temperature and sintering temperature ,because they would affect the gel phase transition and control components. It has a very important effect on high-quality superconducting strip preparation. Experiments results showed that drying the sample at 510 °C in temperature is best. all the samples was analyzed by X-ray diffraction. We summed up the data derived from experiments , it showed that sintering the sample at 850°C,we can obtain the mixed phase of Bi-2201 and Bi-2212.