Abstract
The effect of limestone addition on the air permeability, water permeability, sorptivity, and porosity of limestone cement concrete has been investigated. Six Portland limestone cements (PLCs) with different limestone content (10–35% w/w) were produced by intergrinding clinker, gypsum, and limestone. A water-to-cement ratio (w/c) of 0.70–0.62—depending on the cement strength class—was used to prepare concrete of the compressive strength class C20/25 of EN 206-1. A modified commercial triaxial cell for 100-mm-diameter samples was used for the determination of the gas (N 2) and the water permeability of concretes. In addition, the sorptivity and porosity of the samples were measured, while thin sections of the concrete specimens were examined by means of optical microscopy. It is concluded that the PLC concrete indicates competitive properties with the ordinary Portland cement (OPC) concrete. Furthermore, the limestone addition has a positive effect on the water permeability and the sorptivity of concrete.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
