Abstract
Sulfur removal has received increasing attention in recent years primarily for environmental protection purpose. As an attractive technology in the case of gasoline, OATS (olefinic alkylation of thiophenic sulfur) proposed to separate sulfur compounds by distillation after being weighed down by alkylation with olefins in the feed. In this paper, alkylation reactions of thiophenic compounds were studied over solid phosphoric acid catalysts (SPAM and SPAS using MCM-41 and Silicalite-1 zeolite as supporters respectively) and macroporous sulfonic resins (including NKC-9, D005-2 and Amberlyst 35) with model gasoline and FCC (fluid catalytic cracking) gasoline. Results showed that macroporous sulfonic resins showed better performance than solid phosphoric acid catalysts under milder conditions in both feeds. Among the resins, Amberlyst 35 was the most suitable catalyst for the application of catalytic distillation for its good performance at the temperature range of 353–413 K in FCC gasoline. However, the selectivity of isoamylene dimerization over Amberlyst 35 decreased with the temperature, which was harmful to the product yield and catalyst stability. Besides, different activity orders of solid phosphoric acid catalysts in model gasoline and FCC gasoline were explained by combining the acidic properties of the catalysts with the species of olefins in two feeds.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.