Abstract
While the technology of spiral-wound reverse osmosis membrane tends to be more and more mature, the reports of hollow fiber reverse osmosis membranes are still relatively sparse. In this report, the hollow fiber composite reverse osmosis membranes were prepared by the interfacial polymerization of m-phenylenediamine (mPDA) and trimesoyl chloride (TMC) using polysulfone ultrafiltration membrane as the support. Post-treatments including with NaOCl solution and polyvinly alcohol (PVA) solution were employed to improve the performance of the membranes. The chemical composition and surface structure of the membranes obtained at the different post-treatment conditions were characterized by attenuated total reflection Fourier transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and atom force microscopy (AFM). The results showed that the salt rejection of the membranes increases dramatically but the permeate flux decreases slightly after NaOCl and PVA solution treatment. The m embrane treated with 500 ppm of NaOCl solution and 20 ppm of PVA solution by turn exhibited the salt rejection of 96.3% and pure water flux of 10.9 l•m-2•h-1) at 500 ppm NaCl solution, 100 psi and 25°C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.