Abstract
Future particle accelerators will require continuous wave operation of SRF cavities capable of supporting high beam currents. An example of this is the Energy Recovery Linac (ERL) at Cornell University, a next generation light source designed to run high currents (100mA) with a high bunch repetition rate (1.3GHz). Obtaining the beam emittance necessary to meet design specification requires strong damping of higher-order modes that can lead to beam breakup. We discuss the optimization and verification of the accelerating cavity. Next we show that an ERL constructed from the optimized cavity geometry – including realistic shape errors – can support beam currents in excess of 300mA while still maintaining beam stability. A niobium prototype 7-cell cavity was fabricated and tested in a horizontal cryomodule. We show that the prototype cavity exceeds quality factor and gradient specifications of 2×1010 at 16.2MV/m at 1.8K by 50%, reaching Q=(3.0±0.3)×1010. The prototype cavity also satisfies all design constraints and has a higher order mode spectrum consistent with the optimized shape geometry. At 1.6K, the cavity set a record for quality factor of a multicell cavity installed in a horizontal cryomodule reaching Q=(6.1±0.6)×1010.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
