Abstract
The macromolecular neutron diffractometer MaNDi is currently under construction at the first target station of the Spallation Neutron Source at Oak Ridge National Laboratory. This instrument will collect neutron diffraction data from small single crystals (0.1–1 mm3) with lattice constants between 100 and 300 Å, as well as data from less well ordered systems such as fibers. A focusing neutron guide has been designed to filter the high-energy neutron component of the spectrum and to provide a narrow beam with a wide spectral window and angular divergence almost insensitive to neutron wavelength. The system includes a final interchangeable section of neutron guide and two slits, which enable tuning of the horizontal and vertical beam divergence between 0.12 and 0.80° (full width at half-maximum) at the sample position. This allows the trading of intensity for resolution, depending on the scientific requirements. Efforts to enhance and develop suitable high-resolution neutron detectors at an affordable price are also discussed. Finally, the parameters of the neutron guide and detectors were used to simulate diffraction from a large unit cell.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.