The integrated approach of carbon capture, utilization, and storage via CO2 mineralization for the removal of fly ash, bottom ash, and exhaust gas―A case study of circulating fluidized bed combustion

Abstract

Despite efforts to reduce dependence on coal-fired power generation due to climate concerns, continued usage for energy stability is anticipated. This study was conducted to address environmental issues associated with coal-fired power generation and promote its persistent utilization. we aimed to establish both eco-friendly and economically sustainable practices by mitigating waste such as fly ash (FA) and bottom ash (BA) emissions while recycling them in circulating fluidized bed combustion (CFBC). Initially, we conducted a literature review to analyze the global and domestic trends in coal-fired power generation. Subsequently, we performed experimental research on CO2 crystallization as a multifaceted approach for treating exhaust gases and waste materials such as FA and BA simultaneously. Throughout this research, we implemented a simple process to ensure scalability. In the context of carbon capture, utilization, and storage (CCUS) technology, we conducted experimental research on mineralizing CO2 targeting FA and BA by applying ambient temperature, atmospheric pressure, and simulated exhaust gas. The empirical findings demonstrated that 12.28 kg CO2/ton and 58.14 kg CO2/ton of CO2 were immobilized for BA and FA, respectively. The economic evaluation was measured based on the experimental results obtained from the techno-economic analysis (TEA). The B/C ratio stands at 1.07, with the cost of composite carbonate estimated at USD 159.6 per ton. With an internal rate of return (IRR) of 7.78 % and a net present value (NPV) of USD 7294.59, the economic viability demonstrates considerable promise. Ultimately, this study aims to mitigate the impact of coal-fired power plants on climate change and enhance environmental sustainability through CO2 removal and waste recycling.