Abstract
Differences in mechanical and physical properties exhibited by novel low-shrink resin-based composite (RBC) formulations compared with conventional methacrylate RBCs may contribute to the clinical success of the candidate material. The aim of the current study was to investigate the effect of water uptake characteristics and water solubility on the mechanical properties of two methacrylate (Z100 and Filtek Z250), an experimental oxirane (OXI) and silorane (SIL) RBC following short- and medium-term immersion. The water sorption/solubility and associated diffusion coefficients of each material (n=5) were measured using gravimetric analysis following short- (0.1, 0.5, 1, 4, 24 and 48 h) and medium-term (1, 4, 12 and 26w) immersion. The bi-axial flexure strength, associated Weibull moduli (n=20) and fracture analysis using scanning electron microscopy (SEM) of each material for similar immersion periods was also investigated. Following 0.5h and each subsequent short- and medium-term immersion period the water sorption of Z100 and Filtek Z250 was decreased compared with OXI. A significant decrease in bi-axial flexure strength and associated increase in filler particle exfoliation identified through SEM was identified for OXI compared with Z100, Filtek Z250 and SIL following 26w immersion. SIL exhibited the significantly lowest water sorption, solubility and associated diffusion coefficient following each immersion period. The increase in water sorption, solubility and the associated diffusion coefficient of the experimental oxirane RBC, OXI was manifested as a significant decrease in bi-axial flexure strength and attributed to the decrease in synergy between the filler particles and resin matrix. The decreased water sorption, solubility and associated diffusion coefficient of the experimental silorane RBC, SIL may potentially improve hydrolytic stability of RBC restorations demonstrated by the non-significant decrease in bi-axial flexure strength following medium-term immersion.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
