Abstract

The characteristics of lateritic soils vary significantly, depending on the laterization process they have undergone. Due to this diversity, physicochemical and mechanical tests may be necessary to assess the feasibility of using it. This research aimed to characterize the soil and sedimented iron ore tailings (IOT) and analyze, through compaction tests, the influence of the Portland cement and the sand in the mixtures used for rammed earth (RE) construction. Three groups were proposed for compaction tests: Group 1 (reference – only soil), Group 2 (40% sand + soil), and Group 3 (40% sand + 2.5% Portland cement). Each group consisted of five mixtures with varying content of soil replacement by IOT. The results showed that, although Groups 2 and 3 increased the maximum dry density values in the mixtures without IOT compared to Group 1, the mixtures did not reach the minimum requirements specified by the Brazilian standard for RE. Additionally, the mixtures without IOT presented high optimal moisture content. The use of IOT in mixtures positively reduced the optimum water content and increased the dry density values, which are important parameters to RE production.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.