The influence of roughness on cyclic and post-cyclic shear behavior of red clay-concrete interface subjected to up to 1000 cycles

Abstract

Dynamic shear behavior of soil-structure interface is one of the most commonly problems in engineering practice, especially for the design and stability analysis of soil-structure interaction system subjected to cyclic loading. This paper presents the results of an experimental study on the interface between red clay and concrete that is subjected to a large number of cycles (up to 1000 cycles). Three concrete blocks with different surface roughnesses were fabricated and displacement-controlled cyclic tests were conducted by using a large-scale direct shear device under three different normal stresses (100 kPa, 200 kPa and 300 kPa). The effects of normal stress, roughness and number of cycles on cyclic and post-cyclic shear behavior of interface were then discussed in detail. The test results show that the red clay-concrete interface exhibits softening behavior under different normal stress levels. The mobilized shear stress decreases moderately with the number of cycles and subsequently remains constant after 500 cycles of loading. The response of interface subjected to cyclic loading shows apparent aeolotropy due to shear directions in every cycle. Interface shear stiffness and damping ratio decreases with increasing cycle numbers. The red clay-concrete interface represents an overall contraction behavior in cyclic and post-cyclic direct shear tests. The cyclic loading does not lead to degradation for post-cyclic shear strength.