Abstract
α″-Fe16N2 materials are of increasing interest for their applications in products such as rare earth-free permanent magnets. The lack of a method of mass production for powders as raw materials delays the preparation of such magnets. Through employing the gas atomization method, we managed to prepare α″-Fe16N2 powders whose morphology and magnetic properties were tailored by the preparation parameters. As a result of optimizing the preparation parameters (ejection temperature and pressure, ejection nozzle diameter, and atomization pressure), we managed to prepare powders with a size of about 30 μm and a content of 31% α″-Fe16N2 phase. The value of the saturation magnetization (234.8 emu/g), the reasonable coercivity value (970 Oe) presented by the prepared powders, and the opportunity of scaling up approaches based on the preparation of powders via gas atomization support the feasibility of preparing α″-Fe16N2 powders at an industrial level.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
