Abstract
This study investigates the effects of different pH environments on the durability of coir fiber-reinforced epoxy resin composites (CFRERCs). The CFRERCs were prepared by combining alkali-treated coir fibers with epoxy resin and exposing them to acidic, alkaline, pure water, and seawater environments for a 12-month corrosion test. The results show that an alkaline environment has the most significant impact on the tensile strength of CFRERCs, with a 55.06% reduction after 12 months. The acidic environment causes a 44.87% decrease in strength. In contrast, tensile strength decreases by 32.98% and 30.03% in pure water and seawater environments, respectively. The greatest reduction in tensile strain occurs in the alkaline environment, with a decrease of 36.45%. In the acidic environment, tensile strain decreases by about 25.56%, while in pure water and seawater, the reductions are 18.78% and 22.65%, respectively. In terms of stiffness, the alkaline environment results in a 49.51% reduction, while the acidic environment causes a 54.56% decrease. Stiffness decreases by 43.39% in pure water and 36.72% in seawater. Field emission scanning electron microscope (FE-SEM) analysis shows that corrosive agents in different pH environments cause varying degrees of damage to the microstructure of CFRERCs. In the acidic environment, corrosive agents erode the fiber–resin interface, leading to delamination and fiber breakage. In the alkaline environment, corrosive agents penetrate the fiber interior, increasing surface roughness and porosity. While pure water and seawater also cause some damage, their effects are relatively mild.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have