Abstract

Barium-strontium titanate Ba1-xSrxTiO3[0≤x≤1] has been investigated for tunable microwave application due to their high permittivity, low losses and high tunability. The influence of MgF2additives on the dielectric performance of Ba0.6Sr0.4TiO3(BSTO) were investigated in this paper. MgF2doped BSTO ceramics were prepared using the conventional mixed oxide techniques. The phase structure, microstructure and dielectric properties of MgF2doped BSTO ceramics were studied. The XRD patterns showed that all the samples exhibit a perovskite phase. A secondary phase of MgO was observed with excessive MgF2additives. The grain size of MgF2doped BSTO ceramics was slightly increased with the increasing of MgF2additives, while the distributed porosity was concentrated to get larger. The relative permittivity, dielectric loss and tunability were decreased accordingly. The relative permittivity was reduced from 3717 (pure Ba0.6Sr0.4TiO3) to 680 (6 wt % MgF2doped BSTO), while the tunability changed from 51.7 % to 6.5 %. The dielectric losses were decreased from 0.004 to less than 0.001. The Curie temperature of MgF2doped BSTO was first decreased with the additives of MgF2(x<2 wt %) then remain the same with the rise of MgF2(2≤x≤6) content.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.