Abstract
Next-generation metal-air batteries are limited by factors such as high overpotential, and low energy efficiency. These factors lead to significant electrode and electrolyte decomposition, and consequently, limit the cell life. The primary cause of these parasitic reactions has been identified as the generation of singlet oxygen (1O2) 1 from the disproportionation of superoxide during both charge and discharge.2 Nonetheless, in addition to singlet oxygen generation, in a lithium air battery the insulating products such as lithium peroxide (Li2O2) tend to accumulate on the cathode overtime and passivate the active surface. This results in early cell death and significantly hinders the overall efficiency of the battery. 3, 4 Redox mediators (RMs) are one potential solution to these problems. For example, by mediating the charge and discharge pathway, they can shuttle electrons back-and-forth between the electrodes and the charge and discharge products. This prevents passivation of the porous cathode by facilitating both a greater distribution of the discharge products, as well as an easier means by which to re-oxidise these insulating materials. The literature shows several examples of redox couples, including quinones, that inhibit the formation of a passivating film to some extent and result in higher rates, higher capacities and longer cycle lives.5, 6 Previously, our group has shown that the choice of RM can either enhance or suppress 1O2 formation during charge.7 We have now expanded this investigation to discharge mediators. In this work, we explore the primary reason for singlet vs triplet oxygen formation and identify if it is possible to suppress 1O2 formation completely via RMs. We leverage mass spectrometry, pressure cell measurements, and spectro-electrochemistry in this work to gain insight into the reaction kinetics and 1O2 generation mechanism. These experimental results are further supported by density functional theory (DFT) to help elucidate the reaction pathway.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.