Abstract
Recent interest in thermoplastic composites for aerospace applications is driven by the need for high-volume manufacturing of materials that display excellent mechanical, thermal, and solvent resistive properties. Specifically, a large component of the composite properties of thermoplastic composites are highly dependent on the crystalline fraction of the semi-crystalline polymer matrix of the reinforced system. This work investigates the melting behavior of poly (ether ketone ketone) (PEKK) and the influence of temperature and fiber on crystallization kinetics and morphology of (PEKK) composites utilizing, differential scanning calorimetry, Velaris-Sefaris modelling, and polarized optical microscopy (POM). Annealing temperatures of 380°C and above were required to fully erase crystalline ordering in the PEKK matrix. Furthermore, carbon fibers accelerated crystallization kinetics in PEKK at a range of temperatures observed via DSC, and Velaris-Sefaris modelling implied a shift from bulk to surface induced nucleation by the addition carbon fiber to the PEKK matrix, reducing activation energy of crystallization events. This nucleation behavior was visually confirmed through POM with observation of transcrystalline domains nucleated from the surface of a single carbon fiber.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.