Abstract

The degradation of the poly(trimethylene carbonate) (PTMC) and poly(trimethylene carbonate-co-ε-caprolactone) (P(TMC-co-CL)) networks cross-linked by 0.01 and 0.02 mol % 2,2′-bis(trimethylene carbonate-5-yl)-butylether (BTB) was carried out in the conditions of hydrolysis and enzymes in vitro and subcutaneous implantation in vivo. The results showed that the cross-linked PTMC networks exhibited much faster degradation in enzymatic conditions in vitro and in vivo versus in a hydrolysis case due to the catalyst effect of enzymes; the weight loss and physical properties of the degraded networks were dependent on the BTB amount. The morphology observation in lipase and in vivo illustrated that enzymes played an important role in the surface erosion of cross-linked PTMC. The hydrolytic degradation rate of the cross-linked P(TMC-co-CL) networks increased with increasing ε-caprolactone (CL) content in composition due to the preferential cleavage of ester bonds. Cross-linking is an effective strategy to lower the degradation rate and enhance the form-stability of PTMC-based materials.

Highlights

  • The results revealed that the degradation of networks was in accordance with a surface erosion mechanism, and the erosion rates could be controlled by the trimethylene carbonate (TMC)/CL ratio and the irradiation dose

  • This was attributed to the fact that bis(trimethylene carbonate-5-yl)-butylether (BTB) copolymerizes better with TMC because it has a similar reactivity to TMC

  • The was degraded in lipase solutions surface [43], erosion werelinked similar to the findings previously reported for demonstrating that the cross-linked results were similar to the findings previously reported for Poly(trimethylene carbonate) (PTMC) [43], demonstrating that the crosslinked PTMC was degraded in lipase solutions via a surface erosion process

Read more

Summary

Introduction

Poly(trimethylene carbonate) (PTMC) is one of the most important biodegradable polymers due to its favorable characteristics, such as excellent degradability and biocompatibility [23,24,25]. The degradation products of PTMC were not acidic, which was much better than polyesters at avoiding the inflammation [27,28,29,30]. PTMC was degraded when incubated in lipase solutions (from Thermomyces Lanuginosus) [23]. PTMC loses it shape due to the lack of structural stability [31], which is undesirable to limit the applications in medical implants.

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call