Abstract
The microstructure, fatigue, and fracture behaviors of a cast and heat-treated Nb-Cr-Ti-Al alloy were investigated. The microstructure of the cast alloy was manipulated by annealing at a temperature ranging from 500 °C to 1500 °C for 1 to 24 hours. The heat treatment produced Cr2Nb precipitates along grain boundaries in all cases except in the 500 °C heat-treated material. Fracture toughness tests indicated low fracture resistance in both the as-cast and heat-treated materials. Fatigue crack growth tests performed on the 500 °C heat-treated material also indicated a low fatigue crack growth resistance. Direct observations of the near-tip region revealed a cleavage-dominated fracture process, in accordance with fractographic evidence. The fracture behavior of the Nb-Cr-Ti-Al alloy was compared to that of other Nb-Cr-Ti alloys. In addition, theoretical calculations of both the unstable stacking energy (USE) and Peierls-Nabarro (P-N) barrier energy are used to elucidate the role of Al additions in cleavage fracture of the Nb-Cr-Ti-Al alloy. The results indicate that an Al alloying addition increases the USE, which, in turn, prevents the emission of dislocations, promotes the nucleation and propagation of cleavage cracks from the crack tip, and leads to a reduction in the fracture toughness.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call