Abstract
The dowel-bearing tests were conducted to investigate the embedding strength of laminated bamboo parallel to grain for the design of dowel-type connections according to ASTM D 5764-97a. The embedding strength is evaluated by the 5% diameter off-set method and the maximum embedding strength is determined by the ultimate load. The effects of the specimen size, the loaded length and the bamboo strip arrangements on the test results have been discussed. The embedding strength decreases gradually with the increase of the thickness and the loaded length. The difference in embedding strength for different bamboo strip arrangements is negligible. The two typical failure modes and corresponding load-displacement curves have been analyzed. The theoretical results of embedding strength in different national standards have been compared with each other, and the calculation equation among dowel diameter and compressive strength parallel to grain is proposed by regression analysis of the test data. It presents a better prediction for the embedding strength of laminated bamboo.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
