Abstract
Embedding tests parallel and perpendicular to the grain were conducted to produce a database of embedding strength of wood for the design of dowel-type joints. Dowel diameters were 8,12,16, and 20mm. Embedding strength was evaluated by the 5% off-set method and a maximum load up to 5mm displacement according to EN383. The embedding strength parallel to the grain evaluated by the former method showed values close to those obtained with the latter method, but they showed a significant difference in tests conducted perpendicular to the grain. The embedding strength parallel to the grain was 0.9 times as large as the compressive strength parallel to the grain regardless of the evaluation method. The embedding strength perpendicular to the grain evaluated by the 5% off-set method was four times as large as the compressive strength perpendicular to the grain. When the embedding strength perpendicular to the grain was evaluated by a maximum load up to 5mm displacement according to EN383, the ratio of embedding strength perpendicular to the grain to the compressive strength perpendicular to the grain decreased as the dowel diameter increased.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
