The enhanced responsivity and response speed of SnO2 visible-blind transparent photodetectors via the SiO2 passivation layer.

Abstract

Recently, transparent ultraviolet (UV) photodetectors have gained wide attention for their giant potential in integrated transparent electronics applications. SnO2 films as a common candidate for visible-blind transparent ultraviolet photodetectors have attracted increasing attention. In this work, high-performance visible-blind transparent UV photodetectors based on SnO2 thin film and a SiO2 passivation layer were successfully synthesized by the sol-gel spin coating method for the first time. The obtained SnO2/SiO2 hybrid device has a transmittance of nearly 80% in the visible band at 400-700 nm and demonstrates a high responsivity of 769 mA W-1 and a detection sensitivity of 1.24 × 1014 Jones under UV light illumination. The UV-C/UV-A rejection ratio is greater than 106, indicating that the device has good photo-selectivity. In addition, after the introdution of the SiO2 layer, the response speed is 2 times higher than that of pure SnO2. The presence of the SiO2 layer reduces the exposed area of SnO2, passivates the oxygen vacancies on the surface of SnO2 and inhibits the surface chemical adsorption. The above results provide a new perspective for improving the performance of SnO2 thin film for visible-blind transparent ultraviolet photodetectors.