Abstract

Aligned carbon nanofibers (ACNFs) were fabricated by electrospinning using a high speed of rotary collector (2000rpm). To achieve a synergy effect of the electron double layer and redox faradaic reaction, NiCo2O4 was deposited on the surface of the ACNFs using an electrodeposition method. The improved electrochemical performance of the electrodes was investigated by cyclic voltammetry, galvanostatic charge-discharge testing, and electrochemical impedance analysis. Among the prepared electrodes, which were deposited for different times (5, 10, 20, and 30s), the sample deposited by NiCo2O4 for 10s had the highest specific capacitance (90.1Fg−1 at 5mVs−1), good rate capability (64.7%), and cycle stability (85.2% after 1000 cycles). In addition, to examine the effects of the alignment and redox faradaic reaction of NiCo2O4, the ACNFs covered with NiCo2O4 for 10s (NC-ACNFs) were compared with the ACNFs deposited by Co3O4 (C-ACNFs) and randomly oriented carbon nanofibers covered with NiCo2O4 (NC-RCNFs). The NC-ACNFs had a 15.8% and 11.3% higher specific capacitance than that of the C-ACNFs and NC-RCNFs, respectively. These results suggested that the electrochemical properties of carbon nanofibers could be improved through the structural effects of aligned nanofibers and a redox faradaic reaction of NiCo2O4.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call