Abstract
Electrochemical supercapacitors, one of the storage devices, have attracted much attention owing to their high power density, fast charge-discharge and long cycle life. In this study, we present findings of a hybrid system comprised of gold and polyaniline, fabricated via an in-situ, one pot synthesis route and designed for use in symmetric supercapacitor application. The gold-polyaniline (Au-PANI) based hybrid material was thoroughly characterized using microscopic, optical, and surface analytical techniques to gain a comprehensive understanding of the system. The electrochemical performance of Au-PANI based electrode was examined using cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) and electrochemical impedance spectroscopy (EIS) techniques. The hybrid system exhibited maximum specific capacitance (CS) 387F/g at the current density of 12A/g for three electrode system. The symmetric supercapacitor exhibited a maximum specific capacity (QS) 303mAh/g at the current density of 0.1A/g and achieved a maximum energy density (ED) and power density (PD) of 243 mWh/kg and 619W/kg at the current density of 0.1A/g and 0.9A/g, respectively. Further, the Au-PANI based symmetric device was applied to generate low-frequency waveforms.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.