Abstract
The fluid-flow and heat-transfer features of cellular metal lattice structures made from copper by transient liquid phase (TLP) bonding and brazing of plane weave copper meshes (screens) were experimentally characterized under steady-state forced air convection. Due to the inherent structural anisotropy of this metal textile derived structure, the characterizations were performed for several configurations to identify the preferable orientation for maximizing thermal performance as a heat dissipation medium. Results show that the friction factor of bonded wire screens is not simply a function of porosity as stochastic materials such as open-celled metal foams and packed beds, but also a function of orientation (open area ratio). The overall heat transfer depends on porosity and surface area density, but only weakly on orientation. Comparisons with stochastic metal foams and other heat dissipation media such as packed beds, louvered fins and microtruss lattice cellular materials suggest that wire-screen meshes compete favorably with the best available heat dissipation media. The overall thermal efficiency index of the copper textiles-based media is approximately three times larger than that of stochastic copper foams, principally because of the lower pressure drop encountered during coolant propagation through the periodic wire-screen structure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.