Abstract
Iron ores should be separated from oxygen and impurities which are coming along during the mining process. The separation process is known as reduction. There are two types of reduction process, and the most common is direct reduction process (DRP). There are several parameters in DRP which will determine the quantities of the product known as direct reduction iron (DRI). This worked discussed the effect of reduction temperature and pellet heap to the quantities of DRI using single conveyer belt Hearth furnace. The worked was done in laboratory scale using composite pellets with 14 mm in diameter. The ratio of iron ore to coal in the composite pellet is 1 to 1. The reduction process temperatures are 500oC, 700oC and 900oC. The reduction time is 25 minutes. While the pellets heap are also varied to 1, 3, 5, 7, 8 and 9 layers. The results show that DRI was formed in 700OC and the quantities of DRI are in line with the reduction temperatures and layers of composite pellets heap.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call