Abstract
Porous nanocrystalline titania films were prepared by microarc oxidation (MAO) of a titanium alloy keeping anodic voltage at 230–410 V and cathodic voltage at 20–45 V in a Na 2CO 3 and Na 2SiO 3 electrolytic solutions using an asymmetric pulse alternating current power supply. XRD, EDS and SEM were employed to characterize the phase, composition and microstructure of the films. It is found that the films consist of dominant rutile and little anatase phases. The phase, pore size and thickness of the coatings strongly depend on the applied voltage, consistent with the previous reports, and the cathodic voltage has an intense effect on the films' pitting corrosion performance in sodium chloride solution. The films prepared by keeping the anodic and cathodic voltages at 320 and 45 V, respectively, for 30 min were porous, with 200 nm to 4 μm pores and the pore walls composed of 100–300 nm rutile crystallites.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
