Abstract
AbstractCatalytic fast pyrolysis is a method for converting lignocellulosic biomass into renewable aromatics and olefins. Water is a byproduct of this reaction and is also present in the biomass feed. As the water partial pressure is increased from 0 to 212 Torr (0 to 28 kPa), there is an increase in furan conversion from 43.8 to 84.8 % over ZSM‐5. The CO2 and propylene yields also increase from 0.7 to 16.4 % and 2.9 to 44.9 %, respectively, as the water partial pressure increases. Water partial pressures in an industrial catalytic fast pyrolysis reactor should be within the range of water partial pressures used in this study. These results demonstrate that the presence of water promotes hydrolysis reactions in the gas‐phase conversion of furanic pyrolysis vapors over zeolite catalysts.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
