Abstract
The aim of this study was to evaluate the biomechanical behavior, by means FEA, of maxillary central incisor with weakened roots restored with different posts, crowns and ferrule presence. A digital image of an intact maxillary central incisor section plane around the alveolar bone was obtained in order to build the model of sound tooth. A sound tooth and eight two-dimensional numerical models were generated from the protocol of image processing. The studied factors were: crown type - metal-ceramic crown (MC) and alumina-reinforced ceramic (CC); post type - glass fiber post (GFP) and cast post and core (CPC); and ferrule - absence of ferrule (AFE) and 2,0 mm ferrule (FE2). A 2N static and oblique load with a 135° inclination to the tooth longitudinal axis was applied at the level of palatal surface of the crown. The displacement was restricted and stress of tensile and compression within the tooth structure was recorded. Cast post and core models concentrated stresses in post dentin interface and glass fiber post models had homogeneous stresses distribution within the root dentin similar to sound tooth. The restorative complex GFP-CC concentrated higher stress in coping than GFP-MC, both models with or without ferrule. The ferrule presence improved the stress distribution regardless of the crown and post types. Therefore, cast post-and-cores concentrate too much stresses within a root dentin and post interface; glass fiber post has more homogeneous stress distribution in dentin than cast post-and-cores; the presence of 2 mm ferrule improves the mechanical behavior.
Highlights
The) aim) of) this) study) was) to) evaluate) the) biomechanical) behavior,)
By) means) FEA,) of) maxillary) central) incisor) with) weakened) roots) restored)with)different)posts,)crowns)and)ferrule)presence.)A)digital) image) of) an) intact) maxillary) central) incisor) section) plane) around) the)alveolar)bone)was)obtained)in)order)to)build)the)model)of)sound) tooth.) A) sound) tooth) and) eight) twoHdimensional) numerical) models) were)generated)from)the)protocol)of)image)processing.)The)studied) factors)were:)crown)type)H)metalHceramic)crown)(MC))and)aluminaH
Mm) ferrule) (FE2).) A) 2N) static) and) oblique) load) with) a) 135°)
Summary
The) aim) of) this) study) was) to) evaluate) the) biomechanical) behavior,)
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
