The Effect of the Rotating Disk Geometry on the Flow and Flux Enhancement in a Dynamic Filtration System

Abstract

A numerical study was conducted to investigate the effect of rotating patterned disks on the flow and permeate flux in a dynamic filtration (DF) system. The DF system consists of a rotating patterned disk and a stationary housing with a circular flat membrane. The feed flow is driven by the rotating disk with the angular velocity ranging from 200 to 1000 rpm and the applied pressure difference between inlet and outlet ports. Wheel-shaped patterns are engraved on the disk surfaces to add perturbation to the flow field and improve the permeate flux in the filtration system. Five disks with varying numbers of patterns were used in numerical simulations to examine the effects of the number of patterns and the angular velocity of the disk on the flow and permeate flux in the DF system. The flow characteristics are studied using the velocity profiles, the cross-sectional velocity vectors, the vortex structures, and the shear stress distribution. The wheel-shaped patterns shift the central core layer in the circumferential velocity profile towards the membrane, leading to higher shear stresses at the membrane and higher flux compared to a plain disk. When the number of patterns on the disk exceeded eight at a fixed Reynolds number, there were significant increases in wall shear stress and permeate flux compared to a plain disk filtration system with no pattern.