Abstract

Abstract The fatigue behavior of four extruded Mg-Y-Zn alloys containing different volume fractions of long-period stacking ordered (LPSO) grains was investigated through a comparative study combining experiments and crystal plasticity finite element simulations. Strain controlled low-cycle fatigue experiments were conducted at different strain amplitudes and revealed a limited cyclic hardening in Mg89Zn4Y7 alloy or softening in Mg99.2Zn0.2Y0.6 and Mg97Zn1Y2 alloys. A decrease in the fatigue life against the plastic strain with the increase in LPSO phase volume fraction was observed and was related the limited ductility of extruded LPSO grains. Stress-strain hysteresis curves were used to calibrate and validate a crystal plasticity model taking into account twinning and detwinning. The interaction of the different phases on the distribution of local micro-mechanical fields at the grain scale was then analyzed on synthetic microstructures under strain-controlled conditions. Deformation twinning activity was predicted in coarse unrecrystallized grains and tended to disappear with the increase in the LPSO phase volume fraction. Cleavage-like facets observed in LPSO grains were related to high tensile stress, especially at the Mg/LPSO interface, due to the limited number of deformation mechanisms in LPSO crystal to accommodate out-of-basal plane strain. The increase of the fatigue limit with the increase in LPSO phase volume fraction was finally associated with the decreasing presence of coarse unrecrystallized α-Mg grains due to a higher dynamic recrystallization activity during the extrusion process.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call