Abstract
The dust of electric arc furnaces (EAF-dust) contains significant amounts of zinc in the form of various chemical compounds. Therefore, dust can be used as a raw material for zinc extraction. EAF-dust containing 20 wt.% Zn has been studied. The effect of dust roasting with Ca O and Na2CO3 additives on the degree of conversion of ZnFe2O4 to Zn O was studied experimentally. The effect of the roasting temperature of 700, 850 and 1000 °C and the roasting duration of 1, 2 and 3 hours were established. Ca O and Na2CO3 additives in dust contribute to the destruction of ZnFe2O4 due to the formation of Ca2Fe2O5 and NaFeO2. After treatment, zinc is presented in the form of acid soluble zinc oxide. The content of acid-soluble zinc increases from 25% in the initial dust to 97 – 98% in the roasting product (“cinder”) under optimal roasting conditions.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
