Abstract
Purple yam starch-based edible film experienced high water vapor transmission rate. The use of composite starch using addition of modified starch of smaller size particles may decrease the rate. This study aimed to obtain starch concentrations that produced smallest size of modified starch, to produce composite starch for edible films and to determine the characteristics of edible films made out of native starch and edible films from composite starch (mixture of native starch and modified starch with the smallest size). This research was conducted in 2 stages: modification of purple yam starch by precipitation method and production of edible films from native starch and composite starch. This study was designed to produce modified starch using 5 levels of starch concentration (0,2%, 0,4%, 0,6%, 0,8%, and 1%) and 2 repetitions. The results showed that the treatment of 0,8% starch concentration produced the smallest particle size of starch (3,211 x 10,340 µm) up to (20,876 x 25,437 µm) with starch yield of 76,25%. Edible films made out composite starch have different characteristics than native starch alone. Edible films from composite starch produced higher thickness values ​​of 0.161 ± 0.007 mm, lower solubility 32,080 ± 4,671%, lower transparency of 10.644 ± 0.357% / mm and lower water vapor transmission rate (WVTR) of 24,701 ± 7,05 g / m2. hour and higher compressive strength 356,87 ± 7,38 gF than native starch edible films.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
