Abstract
In the present work, pure forsterite (Mg2SiO4) powder was successfully synthesised via ball milling and subsequent heat treatment as an evident from X-ray diffraction analysis. The synthesised powder were formed by powder agglomerates that were made up of loosely packed fine particles. Then, the forsterite green bodies were sintered at 1200 and 1400°C with two different ramp rates (2 and 10°C per minute) via conventional pressureless sintering. No decomposition of forsterite phase was observed at both ramp rates. This study revealed that lower ramp rate (2°C per minute) possessed minor improvement on the mechanical properties only at lower sintering temperature (1200°C), whereas 10°C per minute ramp rate gave a significant enhancement on the mechanical properties of forsterite at 1400°C. A high fracture toughness of ∼4·9 MPa m1/2 and Vickers hardness of ∼7·1 GPa were obtained for forsterite samples sintered at 1400°C with a ramp rate of 10°C per minute.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call