The Effect of Sandblasting and Coating of Zirconia by Nano Composites on Bond Strength of Zirconia to Resin Cements.

Abstract

Statement of the Problem: Despite yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) high strength in dental restoration application, Zr- the framework has a low tendency to react chemically with cement which is the main reason of these restoration failures.Purpose: The aim of this in vitro study was to evaluate the effect of Y-TZP coating by nanocomposite of silica and aluminosilicate according to the sol-gel dip-coating technique on the bond strength of resin cement to Y-TZP. Materials and Method: In this experimental study, Y-TZP blocks (10×10×3mm3) were prepared and sintered and assigned into 4 groups (n=10) for coating including control group without any further surface treatment, sandblasted using 110μm alumina particles under 2.5 bar and tip distance of 10 mm, silica sol dip coating+calcination, aluminosilicate sol dip coating+ calcinations. To confirm chemical bonds of sol-gel covers, Fourier transforms infrared spectroscopy (FT-IR) technique was used. The surface of the sample was investigated by scanning electron microscopy (SEM), energy-dispersive spectroscopy detector (EDS) and x-ray diffraction (XRD) methods. Micro-shear bond strengths (µSBS) of zirconia-cement specimens were evaluated. Data were analyzed with a one-way ANOVA test in SPSS version 11.5 software with a confidence interval of 95%. Results: µSBS of sandblasting, nano-silica, and nano-aluminosilicate specimens were significantly higher than control. µSBS of nano-silica was higher than other groups but no significant difference was observed in µSBS of sandblasting nano-silica, and nano-aluminosilicate groups (p> 0.05).Conclusion: Covering the zirconia surface with non-invasive nano-silica and nano-aluminosilicate using the sol-gel technique leads to improved cement bond strength.