Abstract
The effect of humidity during the pre-compaction storage of milled activated materials on the powder and compact properties was studied. Test materials were sodium chloride, sucrose, dicalcium hydrogen phosphate (CHP) and acetylsalicylic acid (ASA). Storage of the milled powders at 0% RH before compaction affected neither the powder characteristics nor the tablet strength of the materials. Storage at high RH before compaction affected the powder and tablet surface areas as well as reducing the tablet strength for sodium chloride. Crystallisation of the solid materials' activated surfaces occurred before compaction, i.e., a deactivation of the milled material, mediated by the presence of water vapour at the particle surfaces. For sucrose, a reduction in powder surface area on pre-compaction storage at high RH did not lead to changes in tablet strength. This was attributed to its fragmenting behaviour during compaction creating new bonding surfaces. Storage of sodium chloride and sucrose compacts increased the tablet strength except at 0% RH, suggesting the existence of a lower critical RH, below which the compacts appeared to be physically stable. The pre-compaction powder storage at high RH, reduced the post-compaction strength increase for sodium chloride compacts. ASA and CHP being less water soluble were not affected by RH on pre-compaction storage of the milled powders.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.