The effect of particle size on the sublimation behavior of butylhydroxytoluene as antioxidant in tablets during storage and coating

Abstract

The effect of particle size on the sublimation behavior of butylhydroxytoluene (BHT) was investigated when BHT was included as antioxidant in tablets. Sublimation of pure BHT was found to be independent of its particle size, with pore formation on the surface of all tablets after storage at room temperature and above. Moreover, a higher residual BHT content after storage was detected in tablets containing a larger size fraction. X-ray µCT scans revealed the formation of peripherally larger pores at higher BHT particle sizes, implying a slower sublimation rate in the tablet core. A stability study indicated an increase in the extent of BHT sublimation at higher temperature and longer exposure time for all size fractions. The influence of BHT particle size was more pronounced when the tablets were stored at higher temperature, but the effect receded with longer exposure time. Similar trends were seen in film-coated tablets. Due to the short exposure time to elevated temperatures, a gradient in pore size was also observed at smaller particle sizes, with peripheral pores being larger in uncoated tablets. Superficial pores disappeared when a film coating was deposited onto the tablets. After storage of the film-coated tablets, less BHT had sublimated compared to the uncoated tablet. The coating layer did not prevent sublimation, but the process was slowed down.