The effect of multiwall carbon nanotubes on the properties of room temperature-vulcanized silicone adhesives

Abstract

The effects of surface-functionalized and pristine multiwall carbon nanotubes (MWCNT) on the bulk and adhesion properties of silicone nanocomposites were investigated. The MWCNTs surface functionalization was carried out by silanization of methacryloxy or vinyl-based silanes. The nanocomposites were prepared using solvent mixing which enhanced distribution and dispersion of the MWCNTs in the high-viscosity silicone matrix. The quality of dispersion was evaluated using scanning electron microscopy (SEM) indicating good dispersion state. It was found that the optimal concentration of both treated and untreated MWCNTs in the nanocomposites was 1 wt.%. Above this threshold value, the nanocomposites properties were reduced. Furthermore, the silane treatment of the MWCNTs was proven to be an effective process that resulted in a significant increase in the nanocomposites properties compared to the neat polymer, leading to higher storage modulus simultaneously with up to 27% improvement in the tensile strength and elongation, 20–30% reduction in the thermal expansion coefficient, 220–300% enhancement in crystallinity (enthalpy of fusion), and up to 56% improvement in the lap shear strength. SEM analysis indicated that significant changes in the fracture morphologies occurred due to higher energy absorption in the case of silane-treated MWCNTs. It was concluded that incorporation of silane-treated MWCNTs is an effective route to reinforce and increase the toughness of silicone-based adhesives.