Abstract
The effect of torsional mean stress on the fatigue behavior of glass fiber-reinforced polyester (GFRP) is studied by testing thin-walled, woven-roving tubular specimens with two fiber orientations, [±45°]2s and [0,90°]2s, at negative stress ratios (R),R=−1,−0.75,−0.5,−0.25, 0. The [±45°]2s specimens were found to have higher fatigue strength than the [0,90°]2s specimens at all stress ratios. This is attributed to the difference in local stress components, the [±45°]2s specimens being subjected to tension-compression local stress components, while the [0,90°]2s specimens being subjected to pure local shear stress. For the studied stress ratios; the mean stress component had a detrimental effect on the amplitude component for the [±45°]2s specimens; while it was ineffective for the [0,90°]2s specimens in a certain region in the mean-amplitude diagram, region (1), then it had a detrimental effect in the rest of the diagram, region (2). The S–N curves for positive stress ratios were extrapolated from those for negative stress ratios, which were found experimentally, for the [0,90°]2s specimens. The positive stress ratio points, having the same local stress state as the negative ones, showed an acceptable behavior tending to decrease the amplitude component for the same life.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
